User`s guide

Installing the Software
8
For Mac OSX
* Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall
settings are not set correctly when the version is updated.
Installing
Make sure you check the following points before starting installation.
• Close all running applications before starting installation.
• When the language selected for the installation varies from that of the
OS being used, the screens may not be displayed correctly.
q
For EMP NS Connection users
The name of the software has changed.
Before change: EMP NS Connection
After change: EasyMP Network Projection
When using the same function as EMP NS Connection on the projector,
install EasyMP Network Projection after uninstalling EMP NS Connection.
Depending on the model, you may not be able to connect to the projector
correctly using EMP NS Connection.
For Windows
q
You need administrator authority to install EasyMP Network Projection.
A Turn on your computer.
B Insert the EPSON Projector Software CD-ROM into the
computer.
The installer starts automatically.
q
If the installer does not start automatically, open the CD-ROM drive from
My Computer (or Computer), and then double-click InstallNavi.exe or
EMP_NSCInst.exe.
C Follow the on-screen instructions to install.
For Mac OS X
A Turn on your computer.
OS Mac OS X 10.4.x 32-bit
Mac OS X 10.5.1 or later
*
32-bit
Mac OS X 10.6.x 32/64-bit
Mac OS X 10.7.x 32/64-bit
Recommended: Mac OS X
10.4.11/10.5.8/10.6.6/10.7.0
CPU PowerPC G3 900 MHz or faster
Recommended: CoreDuo 1.83 GHz or faster
Amount of Memory 256 MB or more
Recommended: 512MB or more
Hard Disk Space 20MB or more
Display Resolution of no less than XGA (1024x768) and no
higher than WUXGA (1920x1200).
Display color of 16-bit color or greater (approx. 32000
display colors)