User`s guide

Troubleshooting
52
Error message when starting up EasyMP Network Projection
Error Messages Remedy
Connection to the projector failed. Try to connect again. If you still cannot connect to the projector, check the network settings on the
computer and the network settings for the projector.
You can make network settings from the projector's Network menu.
See your projector User’s Guide for details.
XXXXXX was disconnected.
The keyword does not match. Re-enter the keyword
displayed on the projector screen.
Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
The selected projector is busy. Do you want to continue
the connection process?
You tried to connect to a projector that is connected to another computer.
When Yes is clicked, it connects to the projector. The connection between the projector and the other
computer is cut off.
When No is clicked, it does not connect to the projector. The connection between the projector and
the other computer is maintained.
EasyMP Network Projection initialization failed. Restart EasyMP Network Projection. If the message still appears, uninstall and then reinstall EasyMP
Network Projection.
s "Installing" p.8
Connection failed due to keyword mismatch. When connecting to a projector for which a Projector Keyword has been set, the wrong Projector
Keyword is entered.
Check the Projector Keyword that is displayed on the LAN standby screen.
s "Operating the Computer" p.13