User`s guide

ManualsBrandsEpson ManualsProjectorsEasyMP Network Projection

Error Messages when Searching for and Selecting Projectors

Error Messages Remedy

Cannot join. The maximum number of participants has been

exceeded.

Sixteen computers are already connected to the projector. Disconnect users and projectors that are not projecting

screens.

s "Ending the Meeting" p.25

The keyword does not match. Re-enter the keyword displayed on

the projector screen.

Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword. If a user is

already connected, check the Projector Keyword with the connected user.

Connection failed due to keyword mismatch. Reconnect to the projector. Enter the Projector Keyword on the keyword entry screen displayed when you connect.

Check the Projector Keyword that is displayed on the projector's LAN standby screen. If a user is already connected,

check the Projector Keyword with the connected user.

Updating display configuration. Please try again in a few minutes.

Select another projector.

When another user is already connected, you can only connect to the projectors in the combination selected by the

other user. Select a projector from the same combination as the user who is already connected, or select a projector that

is in standby status.

One or more projectors are not responding. You cannot connect to multiple projectors simultaneously. Check the network settings on the computer and the

network settings on the projector.

A network error occurred. Try connecting again. If it still does not connect, check the network settings on the computer and the network settings

for the projector.

Connection to the projector failed. Cannot connect to a projector that is already connected using EasyMP Network Projection. Check if the projector you

want to connect to is already connected to EasyMP Network Projection.

Error Messages when Projecting

Error Messages Remedy

The projector has disconnected. An error may have occurred in the projector. Check the projector's indicators.

s User's Guide

A network error occurred. A network error occurred. Check the connection between the computer and the projector.

Error Message List