User`s guide

Cannot connect to the projector you want to use
Cannot connect the projector and the computer via wireless LAN
Check Remedy
Is the Wireless LAN unit connected? Check that the Wireless LAN unit is securely connected.
Is the projector connection mode set to Quick connection mode? EasyMP Multi PC Projection cannot connect using Quick connection mode. Set the connection mode to Advanced
connection mode.
s User's Guide
For wireless LAN connections, is the wireless LAN setting enabled
when the computer is in power save mode?
Enable the Wireless LAN.
Are there any obstacles between the wireless LAN connection
access point and the computer or projector?
Sometimes the indoor environment prevents the projector from being found in a search. Check for any obstacles
between the access point and the computer or projector, and change their position to improve communication.
Is the computer's wireless LAN radio strength set to low? Set the radio strength to maximum.
Does the Wireless LAN conform to 802.11a, 802.11b, or 802.11g? It is only compatible with standards 802.11a, 802.11b, and 802.11g, and not with other standards such as 802.11.
Is Wireless LAN Power set to Off in the projector's Wireless LAN
menu?
Set Wireless LAN Power to On in the projector's Wireless LAN menu from the Configuration menu.
See the following manual for more details on the projector's wireless LAN settings.
s User's Guide
Is the SSID setting different? Set the computer, the access point, and the projector to the same SSID.
Is the same WEP key set? When selecting WEP from Security, set the access point, the computer, and the projector to the same WEP key.
Cannot connect the projector and the computer via wired LAN
Check Remedy
Is the network cable connected correctly? Check that the network cable is securely connected.
Are the computer's LAN card and the built-in LAN function
available?
Check that LAN is valid by checking the device manager under Control Panel - System - Hardware.
Is the DHCP function for Wired LAN turned On? Turn off the DHCP setting for Wired LAN from the Configuration Menu.
See the following manual for more details on the projector's wired LAN settings.
s User's Guide
Solving Problems
32