Setup guide

49
Examples Network Connection Configurations
EasyMP.net Operation Guide
Set up a wireless LAN connection with EasyMP.net.
"Establishing a Network Connection (via Wireless LAN)"
in the EasyMP.net Setup Guide.
* Always check "Enable" for "Adhoc mode" during wireless
LAN setup.
If No Local Area Network (LAN) is Available
Connection Using only Wireless Adhoc Mode (without an Access Point).
Network Environment
• No cable network or wireless network environment is available.
• The projector is fixed to the ceiling and installation is difficult.
Supported wireless LAN cards
See "Wireless LAN Card" in the
EasyMP.net Setup Guide
.
Possible applications
• Each presenter can bring their notebook computer (with a wireless
LAN port) into the room where the projector is installed and project
files using a wireless connection.
You do not need to change the PC connection for each presenter.
Notes
• As the projector is not connected to a network, it can only project
files from a computer with a Wireless LAN card.
Setting Up a Wireless LAN Connection
PROCEDURE
Insert the wireless LAN card into the projector's PC
card slot.
Set up a wireless LAN connection with EasyMP.net.
"Establishing a Network Connection (via Wireless LAN)"
in the EasyMP.net Setup Guide
* Always check "Enable" for "Adhoc mode" during wireless
LAN setup.
Example 5: Connection Using Wireless Adhoc Mode LAN
Only
2
This projector
Wired LAN
Wireless LAN Connection
Adhoc Mode
Wireless LAN
Windows Client (Wireless
Connection)
1
2