Setup guide

19
Setting EasyMP.net Options (EasyConfiguration)
EasyMP.net Operation Guide
Basic System Setup
"System Management" - "Date and Time"
The projector's built-in clock can be set.
"System Management" - "Keyboard"
The keyboard layout can be set. Select a language from the "Keyboard
layout".
"System Management" - "Maintenance"
The projector setup can be reset to factory defaults.
Network Setup (LAN Setup)
"Network" - "Projector Name"
The projector you use can be given a name so that it can be identified on
the network.
"Network" - "LAN"
The following parameters must be set to connect to a network using a
network cable.
Setting the Date
Year Set the current calendar date and clock time. The hours
can be set between 0 and 23 (24-hour system).
Month
Day
Hours
Minutes
Time Zone Select an area.
Daylight Savings
Time
The summer time system of the United States can be set
(you cannot set the summer time of another country).
Setting the Keyboard Layout
Maintenance of EasyMP.net
Initialization The entire system setup will be returned to the factory
default settings.
Naming the Projector
Projector Name The projector name can be up to 15 characters.
A projector name can consist of alphanumeric characters and
hyphens. A projector name consisting of numbers only is not
allowed.
The projector restarts after the name has been set.
Work Group Enter a workgroup name of the Windows network.
Network Connection using Network cables
MAC address Display the MAC address
DHCP
Select "ON" to assign the IP address automatically
using the DHCP. Select "OFF" to set the IP address
manually.
IP address
Enter the fixed IP address to be assigned to the projector.
Subnet mask
Enter the IP address of the subnet mask.
Gateway address
Enter the IP address of the default gateway.
Primary DNS Enter the primary IP address of the DNS.
Secondary DNS Enter the secondary IP address of the DNS.
WINS1 Enter the primary IP address of the WINS server.
WINS2 Enter the secondary IP address of the WINS server.
DNS domain name Enter the DNS domain name.