Setup guide

21
EasyMP.net Software
The "EasyMP.net Software CD-ROM" (delivered with the projector) contains two
software packages (see below). You must select the appropriate software package
and install it on your PC. When a PC with EasyMP.net software is connected to the
projector via the network, the following software can be used:
• EMP NS Connection
Projects a PC screen display via a projector.
• EMP Monitor
Monitors the projector on the network and displays its status information.
Software Operating Environment
The EasyMP.net software can operate in the following environment.
* Macintosh computers are not supported.
Operating Environment of EMP NS Connection
OS Windows 98 SE/Me/2000 Professional/XP Home Edition/XP
Professional *
CPU Pentium III 500MHz or higher frequency CPU (Pentium III
700MHz or higher is recommended.)
Memory
capacity
128 MB or more (192 MB or more is recommended.)
Available
hard drive
disk space
20MB or more
Display unit VGA
(640×480 pixels) or higher resolution display (XGA
(1024×768 pixels) 16-bit colour display is recommended.)