User`s guide

Correcting Keystone Distortion

You can correct keystone distortion using one of the following methods.

• H/V-Keystone

Manually correct distortion in the horizontal and vertical directions

independently.

• Quick Corner

Manually correct the four corners independently.

H/V-Keystone

Manually correct distortion in the horizontal and vertical directions

independently. H/V-Keystone correction is ideal for fine-tuning keystone

distortion.

You can use H/V-Keystone to correct the projected image under the

following conditions.

Correction angle: Approx. 3˚ right and left/Approx. 3˚ up and down

Press the [w] or [v] buttons on the control panel during

projection to display the Keystone screen.

When you press the [w][v] buttons on the control panel, the

correction method screen set in the Configuration menu is

displayed. When you want to perform horizontal and vertical

keystone correction using the [w][v] buttons, set Keystone to

H/V-Keystone from the Configuration menu.

s Settings - Keystone p.131

Adjusting Projected Images