User`s guide

The search results are displayed on the EasyMP Network Projection
projector selection screen.
Provided the target projector has been identified, select that
projector, and then click Connect to establish a connection.
Once you have saved projector information as a profile, you do not
have to specify the relevant details every time you perform a search.
s
"Making a Profile" p.18
Performing a Search with a Profile
You can save a search for a frequently used projector as a profile. A profile
is a file containing all of the information pertaining to a given projector,
such as the projector name, its IP address, and SSID. You can specify a
profile to search for a projector instead of specifying relevant details such as
the IP address and projector name. For example, by creating a group of
profiles for each place where a projector is setup and managing them with
folders, the target projector can be found quickly.
This section explains how to create, edit, and manage a profile.
Making a Profile
Profiles are made by saving search results.
For details on how to edit a previously saved profile, see the following
section.
s
"Managing a Profile" p.20
a
While the projector is displayed on the EasyMP Network Projection
projector selection screen, click Save in the profile.
The Save in the profile screen is displayed.
b
Enter a Profile name, and then click Add.
Projector information is registered in the profile.
If you have previously saved a profile, you are prompted to confirm
whether or not to overwrite. To save a profile with a different name,
select Save as. If you have created a folder for profiles, one of the
Connecting to a Projector on a Different Subnet
18