User`s guide

Show
Releases Stop or Pause.
Pause
Pauses projected images while connecting to the projector.
Presentation Mode
Each time this is clicked, Presentation Mode switches between enabled/
disabled.
s "Projecting Only a PowerPoint Slide Show (Presentation Mode)"
p.23
Projector control
While the projector is connected to the network, the projector's A/V
Mute, Switch PC source and Switch video source functions can be
controlled from both the remote control and the projector's control
panel.
Click
to display the following toolbar.
A/V Mute
Turns the video and audio on or off.
Switch PC source
Changes to images from the port where the signal is
being input.
Switch video source
Changes to images from the video input port.
Screen Preview
Displays the multi-screen preview screen.
Click
to display a preview with the settings you have made. Click
each display to enlarge each Screen Preview to full-screen.
Set options
Transmission performance during the transfer of computer images can
be adjusted.
s "Set options" p.35
Movie Sending Mode
Used to immediately playback a movie file. If the projector cannot
playback movies, the message "The connected projectors do not
support Movie Sending." is displayed.
s "Playing Movies" p.24
Disconnect
Disconnects the connection to the projector.
Signal intensity (Quick Connection Mode only)
This is displayed when the connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit
indicators.
Switch toolbar display
Connecting to a Projector on a Network and Projecting
15