Printer Accessories User Manual

Page | 4
Place the cartridges into the cartridge
housing and press them down firmly by
spreading fingers across all the cartridges.
Important:
ENSURE THAT EACH CARTRIDGE HAS
CLICKED INTO PLACE.
Remove the backing tape from the sticky
pads on the tube support bracket.
Position the bracket around the printer
button housing, ensuring that the plastic
tab fits into the slot.
Place the tubes into the tube support so
that the tubes are taut and there is no
slack.
Ensure that the tubes are placed all the
way in the support.
Remove the backing tape from the small
support bracket and fit as shown