Specifications

22
Press .
After
stopping, when you press , playback is
resumed from the interrupted scene (resume).
A
When you have played back a disc,
press to eject the disc from its slot.
• Once you have pressed , if you want to play
back the ejected disc again, you cannot push it
back into the disc slot manually. Press .
B
Press .
C
If the lamp was on, the lamp turns off
and the Power indicator on the main unit
flashes orange (during cool-down).
D
The confirmation buzzer beeps twice to
indicate that cool-down has completed.
Unplug the power cable from the
electrical outlet.
If you only press to turn off the power,
electricity continues to be consumed.
E
Close the lens cover.
Keep the lens cover in place when the unit is not
being used to protect the lens from dirt and
damage.
Notes on resume play
• If you press when “Loading” is displayed
on the screen, “Resume Play” is displayed and
the disc is played from the last stop position.
• Remember that the resume play function is
canceled if you press twice.
• You cannot resume playing a disc indicated as
on the File List and on VR
formatted .
• You can resume playing up to 10 discs that you
have recently played even if you replace the
discs.
• The position from where playback resumes may
be slightly different to where playback was
stopped.
• The audio language, subtitle language, and angle
settings are memorized along with the stopping
position.
• If you stop play when the disc menu is displayed,
the resume play may fail.
Stopping playback
The Power indicator flashes orange to indicate
that the internal lamp cooling function (cool-
down) is taking place. The buttons on the remote
control and the main unit are disabled when
cool-down is taking place (approx. 5 seconds).
Do not unplug the power cable during cool-down. This
may reduce the lifespan of the lamp.
Turning off the power
Downloaded From projector-manual.com Epson Manuals