Specifications
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
E
DM-D110
Specification
(STANDARD)
59 58
<Function 04> US ( E pL pH n a
[Format] ASCII US ( E p
L
p
H
n a
Hex 1F 28 45 02 00 04 a
Decimal 31 40 69 2 0 4 a
[Range] ( p
L
+ p
H
× 256) = 2 (p
L
= 2, p
H
= 0)
n = 4
a = 10 through 15
[Description] • Transmits the setting value(s) of the memory switch specified by a.
Transmitted data Hex Decimal Number of data
➀ Header 57H 87 1 byte
➁ Flag 24H 36 1 byte
Display number 30 – 39H 48 – 57 0 – 2 bytes
Separate code 1FH 31 1 byte
➄ Data 30 or 31H 48 or 49 8 bytes
➅ NUL 00H 0 1 byte
• Configuration of data as shown in ➄ is transmitted as 8 bytes.
The setting data in the memory switch [Off: Hex=30H / Decimal=48, On; Hex=31H /
Decimal=49] or a data string in the decreasing order from bit 8 to bit 1 as follows:
Example:
Switch
Msw10-
8
Msw10-
7
Msw10-
6
Msw10-
5
Msw10-
4
Msw10-
3
Msw10-
2
Msw10-
1
Status OFF OFF OFF ON OFF OFF ON ON
Transmit data for the memory settings above are 8 bytes of “00010011” (30H, 30H,
30H, 31H, 30H, 30H, 31H, 31H).
5.5 Ignored Commands
The DM-D110 customer display ignores the following ESC/POS commands:
US #
n m (Specify on/off of annunciator)
5.6 Unconditional Transmitted Commands
When the DM-D110 receives the following command, the DM-D110 transmits the same data regardless
of the conditions of DSR.
DLE xx
(real-time command)
Data is transmitted if the following codes are transmitted after the
DLE
command.
00H–08H, 10H, 12H, 14H
App.1