Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
57 56
[Notes] • Only when the customer display is connected as a stand-alone, the host PC can
receive the transmit data from the display.
• Frequent write commands to NV memory may damage to the NV memory.
Therefore, it is recommended to write to the NV memory 50 times or less a day.
• During processing of this command, the customer display is BUSY while writing the
data to the NV user memory and stops receiving data. Therefore, it is prohibited to
transmit data while the display is BUSY.
<Function 01> US ( E p
L
p
H
n d1 d2
[Format] ASCII US ( E p
L
p
H
n d1 d2
Hex 1F 28 45 03 00 01 49 4E
Decimal 31 40 69 3 0 1 73 78
[Range] (p
L
+ p
H
× 256) = 3 (p
L =
3, p
H =
0)
n = 1
d1 = 73 (Character “I”)
d2 = 78 (Character “N”)
[Description] • Changes into the user setting mode and transmits the following data:
Transmitted data Hex Decimal Number of data
➀ Header 57H 87 1 byte
➁ Flag 23H 35 1 byte
 Display number 30 – 39H 48 – 57 0 – 2 bytes
 Separate code 1FH 31 1 byte
➄ NUL 00H 0 1 byte
<Function 02> US ( E p
L
p
H
n d1 d2 d3
[Format] ASCII US ( E p
L
p
H
n d1 d2 d3
Hex 1F 28 45 04 00 02 4F 55 54
Decimal 31 40 69 4 0 2 79 85 84
[Range] (p
L
+ p
H
× 256) = 4 (p
L
= 4, p
H
= 0)
n = 2
d1 = 79 (Character “O”)
d2 = 85 (Character "U")
d3 = 84 (Character "T")
[Description] • Ends the user setting mode session and performs a software reset.