Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
56 55
US ( A pL pH a [n m]1...[n m]k
[Name] Select displays(s)
[Format] ASCII US ( A p
L
p
H
a [n m]1...[n m]k
Hex 1F 28 41 p
L
p
H
a [n m]1...[n m]k
Decimal 31 40 65 p
L
p
H
a [n m]1...[n m]k
[Range] 3 ≤ (p
L
+ p
H ×
256) ≤ 65535 (0 ≤ p
L ≤
255, 0 ≤ p
H
≤ 255)
a = 48
n = 48, 49
0 ≤ m ≤ 255
1 ≤ k ≤ 32767
[Default] Display No.0 or the setting value of the memory switch 15.
[Description] • Selects the displays to which host compute sends data.
• n specifies whether the display is enabled or disabled.
When n = 48, the display of the device number specified with m is disabled to receive
data from the host.
When n = 49, the display of the device number specified with m is enabled to receive
data from the host.
• m specifies the display device number.
When m = 0, all the displays are selected regardless of the previous-set value.
When m ≠ 0, the display of the device number specified with m is selected.
US ( E p
L
p
H
n [parameter]
[Name] User setting commands
[Description] • Executes the process of the user setting commands.
n Function No. Function
1 Function 01 Changes into the user setting mode.
2 Function 02 Ends the user setting mode session. (Performs a software
reset.)
3 Function 03 Sets value(s) for the memory switch.
4 Function 04 Transmits the settings of the memory switch to the host.
•
pL, pH specifies (pL + (pH × 256)) as the number of bytes after pH (n and [parameter]).
•
n specifies the function code.
• The customer display must be in the user setting mode before this command can
change values in the NV memory.
• In Function 02, the customer display performs software reset. Therefore, the
customer display clears the receive buffer, and resets all settings (user-defined
characters, macros, the setting of window, and etc.,) and the display to the mode in
effect at power on.
• All customized values in the memory switch set by this command can be read by
Function 04 or the command, even though the customer display does not enter the
user-defined mode.