Specifications

Confidential

EPSON

TITLE

SHEET

REVISION

NO.

SHEET

DM-D110

Specification

(STANDARD)

54 53

US ^ n m

[Name] Execute and quit macro

[Format] ASCII US ^ n m

Hex 1F 5E n m

Decimal 31 94 n m

[Range] 0 ≤ n ≤ 255

0 ≤ m ≤ 255

[Description] Executes the process defined as a macro.

• n specifies the time interval for displaying characters in units of [n × 20 ms] when a

macro is executed. This specifies the time interval before displaying each successive

character but does not affect the processing speed of command codes.

• m specifies the interval of execution. Where macro processing is repeated, it starts

over from the beginning after the completion state of the previous macro processing is

held for [m × 50 ms].

[Notes] • If data is received from the host during macro processing, the macro processing is

terminated.

• After macro processing is finished, the current window is cleared and the cursor is

moved to the home position in the current window.

• Display settings at the completion of macro processing remain valid.

• After macro processing is finished, the screen is cleared and the cursor is moved to

the home position. Display settings in place at the completion of macro processing

remain valid.

• If a macro is undefined, this command is invalid and the display content is not affected.

• If

ESC = n

ESC @

, and

US @

are defined in the macro, these commands are ignored

when executing the macro commands.

• Even if the printer is selected (by a peripheral device selection command) when macro

processing is started, data is not transmitted to the printer during macro processing.

[Reference]

US :