Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
49 48
US T h m
[Name] Set and display time counter
[Format] ASCII US T h m
Hex 1F 54 h m
Decimal 31 84 h m
[Range] 0 ≤ h ≤ 23
0 ≤ m ≤ 59
[Description] The counter time is set and displayed at the right side of the bottom line.
• h is hours, and m is minutes.
[Notes] • When this command is entered, the screen is cleared and the time is displayed in
24-mode at the right side of the bottom line.
• The time counter starts from the transmitted code h:m:00.
• After the time is displayed, the cursor moves to the home position.
• The counter display disappears when any of the following occurs:
1) The cursor moves to the bottom line.
2) Display characters move to the bottom line.
3) The
CLR
command is received.
• Even if the time counter is cleared, it continues to be updated in the display.
[Default] h = 0, m = 0
[Reference]
US U
US U
[Name] Display time counter
[Format] ASCII US U
Hex 1F 55
Decimal 31 85
[Description] Displays the time counter at the right side of the bottom line.
[Notes] • If the time has already been set using the
US T
h m command, the elapsed time is
displayed in real time in the format “hours : minutes : seconds”.
• If the time has not yet been set, the elapsed time (from when the counter was
initialized by turning on the power or from the
ESC @
command) is displayed in real
time in the format “ hours : minutes :seconds ".
• After the counter is displayed, the cursor moves to the home position.
• The counter display is cleared when any of the following occurs:
1) The cursor moves to the bottom line.
2) Display characters move to the bottom line.
3) The
CLR
command is received.
• Even if the time counter is cleared, it continues to be updated in the display.
[Reference]
US T