Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
48 47
US MD3
[Name] Select horizontal scroll mode
[Format] ASCII US MD3
Hex 1F 03
Decimal 31 3
[Description] Selects horizontal scroll mode as the screen display mode.
[Notes] • In horizontal scroll mode, entering a character code scrolls all displayed characters
(including commas and periods) one character to the left, then displays the new
character at the right end (when the cursor is at the right end of either line.)
• Selecting horizontal scroll mode cancels overwrite or vertical scroll mode.
• Except when the cursor is at the right end, entering a character code moves the cursor
one character to the right after displaying the character.
[Reference]
US MD1, US MD2
US C n
[Name] Select/cancel cursor display
[Format] ASCII US C n
Hex 1F 43 n
Decimal 31 67 n
[Range] n = 0, 1, 48, 49
[Description] Selects or cancels the cursor display.
• When n = 1 or 49, the cursor display is selected.
• When n = 0 or 48, the cursor display is canceled.
[Note] This command does not affect the displayed data.
[Default] n = 1 or the setting value by the memory switch 14
US E n
[Name] Set display screen blink interval
[Format] ASCII US E n
Hex 1F 45 n
Decimal 31 69 n
[Range] 0 ≤ n ≤ 255
[Description] Sets or cancels the blink interval of the display screen.
• n specifies the blink interval. [(n × 50 ms.) ON / (n × 50 ms.) OFF] is repeated.
• When n = 0, the display is kept on (cancels blinking).
• When n = 255, the display is turned off but the contents of the display are maintained.
[Note] This command does not affect the brightness of the vacuum fluorescent display.
[Default] n = 0