Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
18 17
4.1.3 Memory switch
The following settings other than the DIP switch can be changed by software as shown in Table 4.1.3.
These settings become effective after the power is turned on or initialization is executed by a command.
Table 4.1.3 Memory Switch
Memory
SW
Function Default Content to be set Range to be set
Msw 10 Character code table section n = 0 Page 0 is selected 0-5, 16-19, 254,
255
11 International character set selection n = 0 U.S.A. is selected. 0-13
12 Brightness adjustment n = 4 100 % 1-4
13 Selection of the peripheral devices n = 2 Display is selected 1-3
14 Cursor display Selected Selected 0, 1, 48, 49
15 Display No. 0 0 0-255
NOTE: Refer to US ( E <Function 03> in section 5.4 Command Details for details.