Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
17 16
4. FUNCTIONAL SPECIFICATIONS
4.1 Switches
4.1.1 Power supply switch
1) Feature: A power supply switch is located on the bottom of the display panel.
2) Function: Turns the power supply on/off.
4.1.2 DIP switches
1) Feature: Two DIP switches are located on the back of the display panel.
2) Functions: Refer to Tables 4.1.1 to 4.1.3. The DIP switch settings are read only when the power
is turned on. Therefore, changing the settings while the power is on has no effect.
Table 4.1.1 DIP Switch 1
SW No. Function ON OFF Default
1-1 Data reception errors Ignores Displays “?” OFF
1-2 Data length 7 bits 8 bits OFF
1-3 Parity check Parity No parity OFF
1-4 Parity selection Even parity Odd parity OFF
1-5
1-6
1-7
Change baud rate (Refer to Table 4.1.2)
ON
OFF
ON
1-8 Self-test execution (*1) Executes Does not execute OFF
(*1): When the power switch is turned on, the DM-D110 displays the continuous display pattern.
Table 4.1.2 DIP Switch 1 Transmission Speed Switching
SW1-5 SW1-6 SW1-7 Baud Rate (bps)
ON ON ON 2400
OFF ON ON 4800
ON OFF ON 9600
OFF OFF ON 19200
ON ON OFF 38400
OFF ON OFF 57600
ON OFF OFF 115200
OFF OFF OFF (reserved)
(bps: bits per second)