Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
16 15
3.5 Power Supply Connector
3.5.1 About the type of power supply connector
The base unit of the DM-D110 provides two types of the power supply connector. One is used for the
input terminals from the external power supply and the other is used for supplying the power to the printer.
Both connectors have the same electrical characteristics (signal functions, signal direction, signal level).
These connectors can be used for the DM-D110 power supply connector to the display interface board or
the power supply connector to the printer.
3.5.2 Power supply connector pin layout
Type: 3-pin locking type connector.
SHELL
2
1
3
Figure 3.5.1 Power Supply Connector
Connector model: Interface board side: TCS7960-532010 (Hoshiden)
3.5.3 Power supply connector
Table 3.5.1 Power Supply Connector Pin Assignments
Pin Number Signal Name Signal Direction Signal Function
1 +24V -- Power supply line
2 GND -- GND
3 NC -- Unused
SHELL FG -- Frame GND