Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
DM-D110
Specification
(STANDARD)
13 12
3.2.4 Stand-alone connection
The stand-alone connection is required to connect the DM-D110 without the printer. In this case, the
printer will be connected to another port than the one for the DM-D110.
Figure 3.2.3 shows the data flow when the DM-D110 is connected as a stand-alone.
Figure 3.2.3 Data Flow in a Stand-alone Connection
1) With the stand-alone connection, the data from the host is transmitted to the DM-D110, and the data
from the DM-D110 is transmitted to the host. Therefore, the status data of the DM-D110 can be
transmitted to the host.
2) The stand-alone connection is effective only when the customer display is selected with ESC = 2 and
either of the user setting commands.