User`s guide

www.hp.com/photosmart
45
Note:
An AC power adapter provides power to the camera. It does not recharge
the batteries.
To connect an AC power adapter:
1. Plug the adapter into a power source (such as a
wall outlet or power strip).
2. Connect the round end of the adapter cable to
the camera.
Note:
If you want to use battery power,
disconnect the AC power adapter from the
power source and the camera. If the AC
power adapter is connected to the camera, even if it is not connected to a
power source, the camera cannot draw battery power.
AC power adapters are available from www.hpshopping.com (selected countries/
regions). For AC adapter specifications, refer to HP’s PhotoSmart Web site at
www.hp.com/photosmart.