Reference Guide

Control Panel 91
4
4
4
4
4
4
4
4
4
4
4
Character table
You can select among various character tables including several
international character sets for the italic character table. This
setting is used when you print without using the printer driver.
When using the printer driver, change the settings on the printer
driver. For details, see “Changing the Printer Settings” on
page 53.
Auto CR (IBM PPDS)
This setting is available only in IBM PPDS emulation mode.
When auto carriage return is on, each line feed (LF) code or
ESC J code is accompanied by a carriage return (CR) code so the
printer moves the next printing position to the left margin.
When this setting is off, you must send a CR code after the line
feed code to move the printing position to the left margin.
IBM character table (IBM PPDS)
This setting is available only in IBM PPDS emulation mode. You
can select Table 2 or Table 1 for the IBM character table.
Buzzer
The printer beeps when an error occurs. See “Using the Error
Indicators” on page 101 for more information on printer errors.
If you do not want the printer to beep when an error occurs, turn
off this setting.
Low-noise mode
When this mode is set to On, printing is quieter but slower.