Reference Guide

80 Control Panel
c Front/Rear button
Selects the front or rear tractor. If you have been using
paper loaded on one tractor, first remove the printed
output before pressing this button to switch the tractor.
dFont (ItemU) button
❏ Selects one of the fonts. To select a font, see
“Selecting a Font and Pitch” on page 83.
❏ In SelecType mode or Default-setting mode, the
button works as an ItemU button. You can press the
ItemU button to select the previous menu. See
“Controlling Your Printer’s Settings” on page 84 for
details.
e Reset
When you press both the Font and Pitch buttons
simultaneously, the printer clears its buffer and restores
its default settings.
f Pitch (ItemD) button
❏ Selects one of the pitch settings. To select a pitch, see
“Selecting a Font and Pitch” on page 83.
❏ In SelecType or Default-setting mode, the button
works as an ItemD button. You can press the ItemD
button to select the next menu. See “Controlling
Your Printer’s Settings” on page 84 for details.