Specifications

-74
Using the Printer Driver
Different printer settings overlay data
The overlay data is made with the current printer settings (such
as Resolution:600 dpi). If you want to make the same overlay with
different printer settings (such as 300 dpi), follow the instructions
below.
❏ Re-access the printer driver as described in step 2.
❏ Make the printer settings and exit the printer driver.
❏ Send the same data that you made by application to the
printer like step 12.
This setting is available only for Form Name data.
Printing with the Duplex Unit
Duplex printing prints on both sides of the paper. When printing
for binding, the binding edge can be specified as required to
produce the desired page order.
To use Printing for Binding, the Duplex Print Unit must be
installed and enabled in the Duplex Print Unit check box on the
Optional Settings dialog box. However, this check box is checked
automatically if the printer is connected to a bi-directional port
and EPSON Status Monitor 3 is running.
As an
E
NERGY
S
TAR
®
partner, EPSON recommends the use of
the double-sided printing function. Refer to “ENERGY STAR®
Compliance” for more information on the
E
NERGY
S
TAR
®
program.
1. Select the Layout tab.
2. Check the Duplex check box.
3. Select a Binding position from Left, Top,orRight.