Specifications

Using the Printer Driver
-69
5. Select the location on the page where you want to print the
watermark from the Location list box.
6. Adjust the horizontal or vertical Offset position.
7. Adjust the image intensity of the watermark with the
Intensity slider bar.
8. AdjustthesizeofthewatermarkwiththeSize slider bar.
9. Select Front (to print the watermark on the face of the
document) or Back (to print the watermark on the backside
of the document) for the Position setting.
10. Click OK to accept the settings.
Makinganewwatermark
You can make a new watermark as follows:
1. Click the Special tab.
2. Check the Watermark check box.