Specifications

-226
RAM Check
The printer is checking the RAM.
Ready
The printer is ready to receive data or print.
Replace Imaging Ctrg
The imaging cartridge has run out. Replace the imaging cartridge.
Reset
The printer’s current interface has been reset and the buffer is
cleared. However, other interfaces are still active and retain their
settings and data.
Reset All
All printer settings have been reset to the user default
configuration, the last settings that were saved.
Reset to Save
You have changed a SelecType setting but the new setting is not
activated immediately after exiting SelecType. To activate the
new setting,do one of the following: (1) exit SelecType by pressing
Continue or On Line (the new setting is activated after the
currentprintjobisfinished),or(2)resettheprinterbypressing
the Alt and Reset buttons at the same time.
ROM Check
The printer is checking the ROM.
Self Test
The printer is performing its internal check cycle.