Specifications

-225
Paper Jam In Duplex
Paper is jammed in the Duplex Unit. Open the top cover of the
Duplex Unit and clear the jammed paper as described under
“Paper Jam In Duplex”.
Paper Out xxx yyy
There is no paper in the specified paper source (xxx). Load paper
of the indicated size (yyy) into the source. See your Setup Guide
or
“Loading Paper” for instructions on loading paper.
Paper Set xxx yyy
The paper loaded in the tray (xxx) does not match the required
paper size (yyy). Replace the paper with the correct size of paper
and press Continue
.
Print Overrun
The required time to process the print data exceeds the print
engine speed because the current page is too complex. Press the
Continue button to resume printing. If this message appears
again, turn on Page Protect in the SelecType Config Menu.
If you continue to receive this message when printing a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.
Lower the Print Quality Setting.
You can also add more memory to the printer as described in
“Installing a memory module”.
Printer Open
The printer cover is open. Close the printer cover to continue
printing.