Specifications

-220
If Auto Continue
is turned on in the printer driver or SelecType,
some error messages are not displayed even though the problem
remains. Ordinarily, you should leave Auto Continue off.
Can’t Print Duplex
The printer cannot work in double-sided printing feature. Make
sure you are using an appropriate type and size of paper for the
Duplex Unit.
Check Duplex P-Size
This message appears when the size of the paper you loaded
doesn’t match the one selected in the printer driver’sBasic
Settings tab or SelecType. Load the correctsize of paper, or change
the paper size setting. Then, open the Duplex Unit cover and
remove any jammed paper. Close the cover of the Duplex Unit,
and press the Continue button. The printer resumes printing.
Check Paper Size
The paper size setting is different from the size loaded in the
printer. Check to see if the correct size of paper is loaded in the
tray; then press the Continue
button.
If you turn on Size Ignore
in the SelecType Config Menu or the
printer driver, this error message does not appear.
Check Paper Type
The paper type setting on theprinter driver’s Basic Settings menu,
or in SelecType, is different from the type of paper loaded in the
printer. Make sure the correct type of paper is loaded in the
printer, then press the Continue button to clear the message.