Specifications

-208
Cause What to do
The selected font is not
supported by your printer.
Be sure you have installed the correct
font. See the section under “How
To - Work with Fonts” for more
information.
Some or all of the printout is garbled or printed as asterisks
Cause What to do
The interface cable may not
be plugged in securely.
Make sure that both ends of the
interface cable are plugged in securely.
You may not be using the
correct interface cable.
If you are using the parallel interface,
make sure that the cable is a
double-shielded, twisted-pair
interface cable no more than six feet in
length.
The Image Optimum
setting may be set to Auto or
On.
If it is, fonts other than those you
expect may be printed to increase the
printing speed. Turn the Image
Optimum setting off in the printer
driver or SelecType.
The emulation setting for
that port may not be
correct.
Specify the emulationmode by using
SelecType. See
“Emulation Menu”
.
If the printer still does not print correctly, contact your dealer or a
qualified service representative.