Specifications

-206
Operational problems
The printer is making abnormal noise
Cause What to do
Abnormal noise may come
from the printer
momentarily immediately
after a new imaging
cartridgeis loaded. This does
not indicate malfunction.
Remove the imaging cartridge from
theprinter,gentlyrockitbackand
forth two or three times, then reload it
into the printer.
The LCD panel stays blank when you turn the printer on
Cause What to do
The printer may not be
connected to the electrical
outlet.
Turn off the printer and check the
power cable connections between the
printer and the electrical outlet; then
turn the printer back on.
If the electrical outlet is controlled by
an outside source such as a wall
switch, make sure the switch is turned
on or plug another electrical device
into the outlet to check whether the
outlet is operating properly.
The printer doesn’t print and the On Line light is off