Specifications

Using the Control Panel
-137
Text
Sets the page length in lines. For this option, a line is assumed to
be 1 pica (1/6 inch). If you change the Orientation, Page Size,
or T. Margin settings, the page length setting automatically
returns to the default setting for each paper size.
Auto CR
Specifies whether the printer performs a
carriage-return/line-feed (CR-LF) operation whenever the
printer position goes beyond the right margin. If this setting is off,
the printer does not print any characters beyond the right margin
and does not perform any line wrapping until it receives a
carriage-return character. This function is handled automatically
by most applications.
Auto LF
If you set thisoption to
Off
, the printer does not send an automatic
line-feed (LF) command with each carriage return (CR). If this is
set to On, a line-feed command is sent with each carriage return.
Set to On if your text lines overlap.
Alt.Graphics
Turns the Alternate Graphics option on or off. The default setting
is Off.
Bit Image
The printer is able to emulate the graphics densities set with the
printer commands. If you select Dark, the bit image density is
high, and if you select Light, the bit image density is low.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.