Specifications

-134
Using the Control Panel
Auto CR
Usetheautomaticcarriagereturnoptiontoperforma
carriage-return line-feed (CR-LF) operation whenever the print
position exceeds the right margin. If Auto CR is Off,theprinter
does not print characters beyond the right margin, and it does not
perform a linewrap until it receives a carriage return command.
Most software programs take care of this function.
Auto LF
When you set Auto LF to Off, the printer does not send an
automatic line feed (LF)command with each carriage return (CR).
When you set Auto LF to On, the printer adds a line feed to each
carriage return it receives. If your text lines overprint each other,
set Auto LF to On.
Bit Image
With Bit Image set to Dark or Light, your printer can correctly
emulate the graphics densities set with the printer commands.
When you select Dark, the bit image density is high. When you
select Light, the bit image density is low.
The BarCode setting converts bit images to barcodes by
automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a barcode
reader. This mode reduces the size of the image being printed and
may cause some distortion when printing bit-image graphics.
BarCode is not available in the I239X mode.
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.