Specifications

Using the Control Panel
-129
GL/2 Menu
In the EPSON GL/2 mode, you can use your printer with plotter
applications. This mode is similar to the GL/2 mode supported
in the HP LaserJet 4 mode. The EPSON GL/2 mode emulates
some of the HP-GL plotter commands and includes all of the
commands found in HP’sGL/2mode,plustwoadditional
commands.
* Pen2 through Pen6 are available only when GLlike is selected.
GLMode
Selects whether the emulation is similar to GL/2 or the HP
LaserJet 4 emulation of GL/2.
Scale
Specifieswhether the output from the softwareis scaled. The scale
factor is based on the output paper size of the application.
Origin
Selects whether the logical origin of the “plotter” is from the
corner or the center of the paper.
Item Values (default in bold)
GLMode GLlike, LJ4GL2
Scale Off,A0,A1,A2,A3
Origin Corner,Center
Pen Pen0, Pen1, Pen2*, Pen3*, Pen4*,
Pen5*, Pen6*
End Butt,Square,Triangular,Round
Join Mitered, Miteredbeveled,
Triangular,Round,Beveled,None
Pen0 through Pen6* 0.05 ... 0.35 ... 5.00 mm in 0.05-mm
increments