Specifications

Using the Control Panel
-127
Font Source
Selectsthedefaultfontsource.
Font Number
Selects the default font number from the default font source.
Pitch
Specifies the default font pitch if the font is scalable and of
fixed-pitch. You can select from 0.44 to 99.99 cpi, in increments of
0.01 cpi.
Height
Specifies the default font height if the font is scalable and
proportional. You can select from 4.00 to 999.75 points, in
increments of 0.25 points.
SymSet
Selects the default symbol set. If the font you selected in
FontSource and Font Number is not available in the new SymSet
setting, the FontSource and the Font Number values are
automatically replaced with the default value.
Form
Selects the number of lines for the selected paper size and
orientation. This causes a line spacing (VMI) change also, and the
new VMI value is stored in the printer. This means that later
changes in Page Size or Orientation settings cause changes in
the Form value, based on the stored VMI.
Source SymSet
Available only when an optional font ROM module is installed.