Specifications

-120
Using the Control Panel
Size Ignore
Allows you to specify whether a paper size error is ignored.
Turning this item on causes the printer to print even if the image
size does not match the specified paper size. This can cause
smudges because of toner that is not transferred onto the paper
properly. When this item is turned off, the printer stops printing
if a paper size error occurs.
Auto Cont
Permits the printer to automatically continue printing after a
certain period of time when one of the following errors occurs:
Paper Set, Print Overrun and Mem Overflow. When this option
is off, you, must press the Continue button to resume printing.
In most cases, it is best to leave this option set to Off.
Page Protect
UsethislisttomakeuseofthePage Protect function. This allows
you to allocate additional printer memory for printing data, as
opposed to receiving it. You may need to use Page Protect if you
are printing a highly complex page. If a Print Overrun error
occurs, change the setting to On and reprint your data. This
reduces the amount of memory reserved for receiving data so
your computer may take longer to send the print job, but it will
allow you to print complex jobs. Page Protect usually works best
if set to Auto. You will need to increase your printer’smemoryif
memory errors continue to occur.
Note:
Changing the Page Protect setting reconfigures the printer’smemory,
which causes any downloaded fonts to be erased.
Image Optimum
Reduces the amount of graphics data when the data reaches the
memory limit, allowing complex documents to be printed. When
this mode is on and memory is limited, the quality of graphics is
reduced.