Specifications

-104
Using the Control Panel
Toner Save Mode
Turns the Toner Save mode on or off. When turned on, the printer
saves toner by substituting a gray shade for the black inside of
characters. The characters are outlined in full black on the right
and lower edges.
Using SelecType
The control panel’s SelecType mode allows you to make detailed
printer settings that you cannot make from your application or
printer driver. It is also useful for making settings when you are
using DOS applications. For more information on when you
should use SelecType, see “When to use SelecType”.
The SelecType mode is accessed by using the control panel
buttons. The functions of the control panel buttons are different
in OneTouch and SelecType modes. For detailed information on
the functions of the buttons, see “Buttons”.
When to use SelecType
In general, use SelecType only for settings you cannot make in
your software, including the following:
❏ Changing the emulation modes and selecting the IES
(Intelligent Emulation switching) mode.
❏ Specifying the channel and configuring the interface.
❏ Choosing the size of the memory buffer used to receive data.
You should keep the following points in mind when using
SelecType settings:
❏ A number of SelecType settings can also be made using the
OneTouch modes.