Specifications

Using the Control Panel
-101
Using the OneTouch Modes
The OneTouch modes allow you to make the most common
printer settings from the control panel when printing from an
application or operating system that does not support your
printer driver. Be sure to use the printer driver to make these
settings whenever you can, since settings made in the application
software always override OneTouch mode settings.
To make OneTouch mode settings, access one of the modes as
described below and press the button located under the setting
you want to change to cycle forward through the available
options. You can also cycle backward through available options
by holding down the Alt button while pressing the button under
the setting you want to change.
7Value Selects the corresponding OneTouch mode
settinglistedabove this button if in OneTouch
mode 1 or 2, or selects the parameter available
within the current item, after entering the
SelecTypemodemenu.
8Enter
(Status Sheet)
Selects the corresponding OneTouch mode
option listed above this button if in OneTouch
mode 1 or 2, or accepts the setting currently
shown on the LCD panel as a new setting
when in SelecType mode. Press this button
two times when the printer is online to print
the status sheet.
9Alt+Menu,
Item, or Value
Returns the shown parameter or setting in
each group to its previous value.