® Epson Stylus CX5800F Basics Guide Basic Copying, Printing, Faxing, and Scanning Maintaining Your Epson Stylus CX5800F Solving Problems
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other equipment.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Selecting a Different Control Panel Language . . . . . . . . . . . . . . . . . . . . . . . 6 Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Copying a Photo or Document . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Placing the Original on the Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Copying . . . . . . . . . . .
Maintaining Your Epson Stylus CX5800F . . . . . . . . . . . . . . . . 47 Checking the Print Head Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checking the Ink Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing Ink Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 48 49 50 Solving Problems . . . . . . . . . . . . . .
Introduction After you have set up your Epson Stylus® CX5800F all-in-one as described on the Start Here sheet, turn here to: ■ Load paper ■ Make a quick copy of a document or photo ■ Print photos stored on a memory card ■ Print photos directly from your camera ■ Print a basic document or photo from your computer ■ Fax a document or photo ■ Scan a document or photo, including restoring a color photo as you scan ■ Perform routine maintenance ■ Solve simple problems This book tells you how to
Selecting a Different Control Panel Language If you prefer to view messages on the Epson Stylus CX5800F display in a language other than English, follow these steps: 1. Press the P On button to turn on the Epson Stylus CX5800F, or press the y Cancel/Back button until you see a screen like this: 12:00 PM Y 2. Press the Setup button. You see this display: 1.Load/Eject 3. Press the u or d button, or press the 7 key on the numeric keypad, to display this option: 7.Language 4. Press the OK button.
Loading Paper Follow the steps here to load paper in your Epson Stylus CX5800F all-in-one. 1. Open the paper support and output tray, then slide out the extensions. 2. Flip the feeder guard forward. Then slide the left edge guide to the left. 3. Insert the paper, printable side up, against the right edge guide. Always load it short edge first, even for landscape printing. The printable side is often whiter or brighter than the other side.
You can load up to 100 sheets of 17 lb plain paper or up to 20 sheets of photo paper. See the User’s Guide for capacity guidelines on other paper types. Note: The type of paper you choose affects the way your printout looks, so be sure to select the correct paper for your job. If you are just making a copy or printing a rough draft of an image, plain paper is fine. However, for the best results, you’ll want to use one of Epson’s special ink jet papers designed for your printer.
Copying a Photo or Document Follow the instructions in this section to: ■ Position your photo or document correctly on the glass (see below) ■ Make copies of a photo or document (on page 11) Placing the Original on the Glass 1. Open the document cover and place your original face-down on the glass, in the upper left corner. Move your original about 0.04 inch (1 mm) away from the top and left edges so all of it will be copied. Move the original about 0.
If you need to copy or scan a thick or large document, you can remove the document cover. Just open it and pull it straight up. If you need to press the document flat while you copy or scan it, do not press too hard and be careful not to move it. Caution: Do not use excessive force on the document cover, and do not twist it. You may damage the document cover. When you are done, replace the document cover by inserting the tabs back into the slots.
Copying You can make copies using either letter-size (8.5 × 11-inch) plain paper, or letter-size, 4 × 6-inch, or 5 × 7-inch photo paper. Copying a Document 1. Press the P On button to turn on the Epson Stylus CX5800F. You see a screen like this: 12:00 PM Y 2. Place the document on the glass as described on page 9. Be sure to close the document cover. 3. Load up to 100 sheets of letter-size plain paper. See page 7 for details. 4. Press the Copy button. You see this display: Copies:1 5.
Copying a Photo 1. Press the P On button to turn on the Epson Stylus CX5800F. You see a screen like this: 12:00 PM Y 2. Place the photo on the glass as described on page 9. Be sure to close the document cover. 3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo paper. See page 7 for details. 4. Press the Copy button. You see this display: 5. If you want borderless photos (printed without a white border), press the Copy button again to select Fit to Page mode.
Speeding Up Copying If you want to make a copy quickly and do not need high quality, you can print a “draft” copy. The print quality is reduced, but the copy is printed faster. 1. Load plain, letter-size paper. 2. Press the Copy button. You see this display: Copies:1 100% 3. Press the paper type button to select Plain Paper. 4. Press the paper size button to select Letter. 5.
Copying a Photo or Document
Printing From a Memory Card or Camera The Epson Stylus CX5800F all-in-one lets you print color photos directly from your digital camera’s memory card; just insert it into a memory card slot on the Epson Stylus CX5800F and you’re ready to print. If your digital camera supports DPOF™ (Digital Print Order Format), you can pre-select the photos you want to print while the card is still in the camera.
Compatible Cards and Image Formats You can use the following types of cards with your Epson Stylus CX5800F: Right slot Slot Type of card Right slot CompactFlash® Microdrive™ Left slot SmartMedia™ Memory Stick™ MagicGate® Memory Stick MagicGate Memory Stick Duo* MultiMediaCard Memory Stick Duo™* Memory Stick PRO™ Memory Stick Pro Duo™* SD™ Card miniSD™ Card* xD-Picture Card™ Memory card access light Left slot * Adapter required The Epson Stylus CX5800F supports image files that meet the following re
Inserting the Card 1. Make sure the Epson Stylus CX5800F is turned on. Note: When you print directly from a memory card, it is best if the Epson Stylus CX5800F is not connected to your computer (or your computer is turned off). 2. Open the memory card door. 3. Make sure the memory card access light is off and that no cards are in any of the slots. Then insert your card into the correct slot. See page 16 for details.
When you want to remove the card, make sure the memory card access light is not flashing, then pull the card straight out of its slot. Note: You can print only in color when printing directly from a memory card; you cannot print in black and white. Caution: Do not remove the card or turn off the Epson Stylus CX5800F while the memory card access light is flashing; you may lose data on the card.
6. Press the OK button. The Epson Stylus CX5800F starts printing the index sheet(s). This may take a few minutes. For multiple index sheets, the pages containing the most recent images are printed first. If you want to cancel printing more sheets, press the y Cancel/Back button. Now follow the instructions below to select which photos to print. Selecting Photos on the Index Sheet 1.
2. Place the index sheet face-down on the glass, in the upper left corner, so that the top of the sheet is aligned against the left edge of the glass. 3. Close the document cover. 4. Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time. (See page 7 for details.) You can load more paper later as necessary to print all your selected photos. 5. The display should now look like this, indicating that the Epson Stylus CX5800F is ready to scan the index sheet: 2.
Printing All Photos or DPOF Photos Follow the steps below to print one copy of each photo on the card or to print only those photos that were pre-selected with your camera’s DPOF feature. 1. Insert the memory card. See page 17 for details. 2. Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time. (See page 7 for details.) You can load more paper later as necessary to print all your photos. 3. Press the Memory Card button repeatedly, until the display looks something like this. 3.
Printing From a Digital Camera If your camera is PictBridge- or USB DIRECT-PRINT™-compatible, you can print your JPEG photos by connecting your digital camera directly to your Epson Stylus CX5800F. Your photos must be sized from 80 × 80 to 9200 × 9200 pixels. 1. Make sure your Epson Stylus CX5800F is not printing from a computer. 2. Remove any memory cards from the slots. 3. Load the type of paper you want to use. (See page 7 for details.) Load enough sheets for the number of photos you’ll be printing. 4.
Printing From Your Computer This section describes the basic steps for printing a photo or document stored on your Windows or Macintosh computer. Note: For detailed instructions on printing, see the on-screen User’s Guide. Before you start, make sure you’ve installed your printer software and connected the Epson Stylus CX5800F all-in-one to your computer as described on the Start Here sheet. Also be sure to use the right paper and select the correct paper type setting in the printer driver.
4. Make sure EPSON Stylus CX5800F Series is selected, then click the Preferences or Properties button. (If you see a Setup, Printer, or Options button, click it. Then click Preferences or Properties on the next screen.) 5.
6. For more printing options, click the Advanced button. Then select the following settings as necessary: Select a color management method (To choose No Color Adjustment, click ICM first) Select Paper & Quality Options as necessary Select Print Options as necessary Click here if you want to see this Advanced screen each time you access your print settings Note: For more information about advanced settings, or instructions on saving them as a group so you can reuse them later, click ? or Help. 7.
Printing With Macintosh OS X If you’re using an OS X-compatible application, follow the steps below to print. 1. Load paper. See page 7 for details. 2. Open the photo or document in your application program. 3. Open the File menu and select Page Setup.
6. Choose Print Settings from the pop-up menu and select the following settings as necessary: Select your Media Type (see page 29) Select Color or Black ink Select higher quality or faster printing (if available) Select Automatic mode Note: For more information about printer settings, click the ? button. 7. Depending on your settings, you can choose these other options from the pop-up menu: ■ Copies & Pages: Select the number of copies you want, or a page range. ■ Layout: Select page layout options.
8. Click the Advanced button to change additional settings. Select Print Quality and other options as necessary Note: For more information on advanced settings, or instructions on saving them as a group so you can reuse them later, click ?. 9. Click Print. 10. To monitor the progress of your print job, click the appears in the dock on the bottom of your desktop. printer icon when it If you’re using OS X 10.2.
Using Special Papers You can purchase genuine Epson ink and paper from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for reseller referral. Paper name Size Part number Epson Premium Bright White Paper Letter (8.
Printing From Your Computer
Faxing a Photo or Document Your Epson Stylus CX5800F all-in-one lets you send faxes by entering fax numbers or selecting entries from a speed dial list. You can customize the fax header information, and select various report printing and send/receive settings. You can also set up your Epson Stylus CX5800F to automatically receive faxes or select to receive them only when you’ve confirmed that you’re receiving a fax.
You also need to set up your Epson Stylus CX5800F to receive faxes manually. See page 41 for details. Setting Up Your Fax Features Before sending or receiving faxes, you may want to create a fax header, select your fax preferences, and set up a speed dial list of frequently used fax numbers. Creating Header Information 1. Press the Fax button once to enter Fax mode. The Fax button lights up and you see this display: Enter Fax Number 2. Press the Setup button. You see this display: 1.Select Speed D 3.
10. Press the keys on the numeric keypad to enter the date. You can enter the numbers 0 to 9. 11. Press the OK button. You see this display (to indicate the hour and minute): HH:MM AM 12. Press the keys on the numeric keypad to enter the time in a 12-hour format. You can enter the numbers 0 to 9. 13. Press the OK button. You see this display: 1: AM 2: PM 14. Press the 1 key or the 2 key on the numeric keypad to select AM (1) or PM (2). 15. Press the OK button. You return to the 2.Date/Time display. 16.
Selecting Send/Receive Settings Your Epson Stylus CX5800F is set up to send and receive faxes using the default settings below. For more information about fax settings, see the User’s Guide. Setting and Options Description Paper Size Letter (8.5 × 11; default) Legal (8.5 × 14) A4 (8.3 × 11.7) Indicates the size of the paper loaded in the Epson Stylus CX5800F for printing received faxes.
Setting and Options Description V.34: On/Off On (default) Off Indicates the speed at which you transmit faxes. On is 33.6 Kbps and Off 14.4 Kbps. Rings to Answer 4 (default) 1, 2, 3, 5, 6, 7, 8, or 9 Indicates the number of rings that must occur before the Epson Stylus CX5800F automatically receives a fax. To change the fax settings listed above, follow these steps: 1. Press the Fax button once to enter Fax mode. The Fax button lights up and you see this display: Enter Fax Number 2.
10. To change the Dial Mode setting, press OK and go to step 11. To change another Communication setting, press the u or d button, or press the 2, 3, 4, or 5 key on the numeric keypad, to display one of these options: ■ 2.DRD ■ 3.ECM: On/Off ■ 4.V.34: On/Off ■ 5.Rings to Answer Then press the OK button. 11. Press the u or d button until the setting option you want is displayed, then press the OK button to select it. 12. Repeat steps 10 and 11 to change any other settings.
Note: If you need to change a character to the left, press the l button to delete the character and re-enter it. Press the r button if you need to move the cursor to the right. 8. Press the OK button again. The screen displays Name briefly, then goes blank except for a cursor (_). 9. Press the keys on the numeric keypad to enter a name for the speed dial entry (up to 30 characters). Use the number keys to enter the letters A to Z (in uppercase or lowercase), the numbers 0 to 9, and various symbols.
4. The phone number for the selected entry is displayed. Press the r button to move to the digits you want to edit. Press the 0 to 9 number keys to enter new numbers or press the l button to delete digits to the left. When you’re finished, press the OK button. 5. The name for the selected entry is displayed. Edit the name the same way as in step 4. When you’re finished, press the OK button to return to the 2.Edit Entry display. 6. Press the y Cancel/Back button to return to the 3.Speed Dial Setup menu. 7.
Sending a Fax Before you fax, place your original document or photo on the document table glass as described on page 9. Then send your fax by manually entering a fax number, redialing the previous fax number, or selecting an entry from your speed dial list. Manually Entering or Redialing a Fax Number 1. Press the Fax button once to enter Fax mode. The Fax button lights up and you see this display: Enter Fax Number 2. Press the keys on the numeric keypad to enter the fax number.
If you need to fax another page, press the 1 key (for Yes). Open the document cover, remove your first original, place your next original, and close the document cover. Then press the OK button to fax the next page. Repeat this step to fax all the necessary pages. Note: If you’re sending a color fax, or a large document that fills up the memory area, the Epson Stylus CX5800F scans and faxes one page at a time. It then asks if you want to send another page.
If you need to fax another page, press the 1 key (for Yes). Open the document cover, remove your first original, place your next original, and close the document cover. Then press the OK button to fax the next page. Repeat this step to fax all the necessary pages. Note: If you’re sending a color fax, or a large document that fills up the memory area, the Epson Stylus CX5800F scans and faxes one page at a time. It then asks if you want to send another page.
Receiving a Fax When the Epson Stylus CX5800F receives a fax with Auto Answer mode turned on, the message Receiving appears on the display. When the Epson Stylus CX5800F receives a fax in manual answer mode, the connected phone begins ringing. Once you answer the phone to confirm that the call is a fax, press the x Start B&W or x Start Color button to receive the fax. The message Receiving appears on the display. After the Epson Stylus CX5800F receives all the pages, it begins printing the fax.
Scanning a Photo or Document You can use your Epson Stylus CX5800F all-in-one to scan a photo or document and save it on your computer or other device. You can even automatically restore faded color photographs as you scan. See page 45 for details. The EPSON Scan software provides three scanning modes for progressive levels of control over your scanned image: ■ Full Auto Mode scans quickly and easily using automatic settings.
Note: If you need to scan a thick document, you can remove the document cover. See page 10 for details. 2. Close the document cover gently so you don’t move the original. 3. Do one of the following to start EPSON Scan: ■ Windows: Double-click the EPSON Scan icon on your desktop. ■ Macintosh: Double-click EPSON Scan in the Applications folder. ■ If you are scanning from an application, start your application. Then open the File menu, choose Import or Acquire, and select EPSON Stylus CX5700F/CX5800F.
Restoring Color in Faded Photos You can automatically transform an old, faded, or badly exposed color photo into one with true-to-life color and sharpness as you scan. Look for the Color Restoration option in EPSON Scan’s Full Auto, Home, and Professional Mode screens: Full Auto Mode Click the Customize button, click to select the Color Restoration checkbox, click OK, and click Scan. Home Mode Preview your image, click to select the Color Restoration checkbox, and click Scan.
Scanning a Photo or Document
Maintaining Your Epson Stylus CX5800F If you notice a decline in print quality, follow the instructions in this chapter for: ■ “Checking the Print Head Nozzles” (below) ■ “Cleaning the Print Head” on page 48 ■ “Checking the Ink Levels” on page 49 ■ “Replacing Ink Cartridges” on page 50 Checking the Print Head Nozzles If your printouts are faint or have gaps in them, some of the nozzles in the print head may be clogged. Follow the steps below to check the print head nozzles using the control panel.
6. Press the y Cancel/Back button to return to the first screen. If the pattern does not look good, try cleaning the print head as described on the next page. Note: You can also check the print head nozzles using software when the Epson Stylus CX5800F is connected to your computer. See the User’s Guide for instructions. Cleaning the Print Head If your printouts are unexpectedly light or faint, or you notice light or dark bands across your printout, you may need to clean the print head.
Note: If you don’t see any improvement after cleaning the print head four or five times, turn off the Epson Stylus CX5800F and wait overnight. This lets any dried ink soften. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. See page 50 for details. Caution: If you do not use your Epson Stylus CX5800F often, it is a good idea to print a few pages at least once a month to maintain good print quality.
Replacing Ink Cartridges If you see a message like this on the display, one or more cartridges are low on ink: Cyan ink low->Pr When you see a message like this on the display, you need to replace one or more cartridges: Cyan ink out->Pr You cannot print when a cartridge is empty. Note: You’ll also see a low ink or ink out message on your computer screen when you print from your computer. You can purchase genuine Epson ink and paper from an authorized Epson reseller.
1. Press the P On button to turn on the Epson Stylus CX5800F, or press the y Cancel/Back button until you see a screen like this: 12:00 PM Y 2. Press the Setup button. You see this display: 1.Load/Eject 3. Press the u or d button, or press the 5 key on the numeric keypad, to display this option: 5.Replace Cartri 4. Press the OK button. 5. Make sure that the document cover is closed, then open the scanner. Caution: Do not open the scanner when the document cover is open.
7. Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package. Caution: Do not remove or tear the label on the cartridge; otherwise, ink will leak. Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 8. Place the new ink cartridge into the cartridge holder and push it down until it clicks into place. 9. Replace any other cartridges that need to be replaced. 10.
11. Close the scanner. 12. Press the OK button. The Epson Stylus CX5800F begins charging ink and Charging appears on the display. Start Color OK Charging takes about one minute. When it’s finished, 5.Replace Cartridge appears on the display. Caution: Never turn off the Epson Stylus CX5800F while Charging appears on the display or you’ll waste ink. Note: If you see an ink cartridge error message on the display, the ink cartridge may not be installed correctly.
Maintaining Your Epson Stylus CX5800F
Solving Problems If you have a problem with your Epson Stylus CX5800F all-in-one, check the display on the control panel to diagnose the cause. You can also check “Problems and Solutions” on page 57 for basic troubleshooting suggestions, or double-click the User’s Guide icon on your computer desktop for more detailed help.
Display message Cause and solution [Cyan, Magenta, Yellow, Black] Ink cartridge error -> Cartridge replacement is necessary. Press the OK button to begin. An ink cartridge that is not supported by the Epson Stylus CX5800F is installed. See page 50 for replacement instructions. No memory card A memory card is inserted that is not supported by the Epson Stylus CX5800F. Remove the incompatible memory card. See page 17 for details.
Display message Cause and solution Paper thickness lever is set for printing sheets of paper. The paper thickness lever is set to the m L position. If you are printing on paper sheets, press x Start Color or x Start B&W to continue. If you’re printing on envelopes, set the lever to the ^ H position. Service required. See your documentation for details. An Epson Stylus CX5800F part needs to be replaced. Contact your local authorized servicer or contact Epson for a referral. See page 60 for details.
Faxing Problems ■ If you have problems sending a fax, make sure the phone cable is connected correctly and verify that the phone line works by connecting a phone to it. Also make sure that your recipient’s fax machine is turned on and working. ■ If you have problems receiving a fax, make sure paper is loaded, the phone cable is connected correctly, and the phone line works. To automatically receive faxes, make sure you see a Y on the first screen display. (See page 41 for details.
Print Quality Problems If you have any problems with the copy or print quality, try these solutions: ■ Make sure the document is placed flat against the document table glass and the Epson Stylus CX5800F is not tilted or placed on an uneven surface. ■ Load the paper printable side up (usually the whiter, brighter, or glossy side). ■ Make sure your paper isn’t damp or curled. ■ Use a support sheet with special paper or load your paper one sheet at a time.
Where To Get Help Epson provides technical assistance 24 hours a day through the electronic support services and automated telephone services listed in the following table. Service Access World Wide Web From the Internet, you can reach Epson Support at http://support.epson.com. At this site, you can download drivers and other files, look at product documentation, access troubleshooting information, and receive technical advice through e-mail.
Notices Important Safety Instructions Before using your Epson Stylus CX5800F all-in-one, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the Epson Stylus CX5800F. ■ Use only the type of power source indicated on the Epson Stylus CX5800F label. ■ Use only the power cord that comes with the Epson Stylus CX5800F. Use of another cord may cause fires or shock. Do not use the cord with any other equipment.
■ Except as specifically explained in your documentation, do not attempt to service the Epson Stylus CX5800F yourself. ■ Unplug the Epson Stylus CX5800F and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance.
Declaration of Conformity According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Located at: Epson America, Inc. MS 3-13 3840 Kilroy Airport Way Long Beach, CA 90806 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
FCC Compliance Statement For United States Users This equipment complies with Part 68 of the FCC rules. On the back side is a label that contains, among other information, the FCC registration number and the ringer equivalence number (REN) for this equipment. You must, upon request, provide this information to your local telephone company. The information associated with the services the equipment is to be connected are REN: BKMOT00BC271A, Jack type: RJ11.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces.
Epson America, Inc., Limited Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser that the Epson printer covered by this limited warranty statement, if purchased and operated only in the United States or Canada, conforms to the manufacturer’s specifications and will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase. For warranty service, you must provide proof of the date of original purchase.
Epson label or logo or the rating label or serial number be removed or should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with nonEpson products, or service other than by an Epson Authorized Servicer.
Index A D Answer mode, fax, 41 to 42 Answering machine, connecting, 31 ArcSoft PhotoImpression, 43, 60 Date setting, 32 to 33 Declaration of Conformity, 63 Digital camera, printing from, 22 Display messages, 55 to 57 DPOF printing, 21 Draft mode, copying in, 13 DSL, 58 B Borderless copies, 12 printing, Macintosh, 26 to 27 printing, Windows, 24 C Camera, printing from, 22 Cleaning document table glass, 59 print head, 48 to 49 Color Management, turning off, 25, 27 Color, restoring while scanning, 45 Colo
H P Head Cleaning utility, 48 to 49 Help, 60 Paper jams, 55, 58 loading, 7 to 8 type settings, 29 Paper thickness lever, 8, 56, 59 PictBridge camera, printing from, 22 Print head checking nozzles, 47 to 48 cleaning, 48 to 49 Printing from camera, 22 from computer, 23 to 29 from memory card, 15 to 21 Problems, solving copying, 57 error messages, 55 to 57 faxing, 58 help, 60 paper feeding, 58 print quality, 59 I Image formats, 16 Image quality problems, 59 Index sheet printing, 18 to 19 selecting/scanning
T Technical support, 60 Telephone connecting, 31 safety instructions, 62 Time setting, 32 to 33 Troubleshooting, 55 to 60 U USB DIRECT-PRINT camera, printing from, 22 W Warranty, 67 to 68 Windows, printing with, 23 to 25 Index 71
CPD-20213R1 Printed in XXXXXX XX.
