Specifications

This feature is intended to allow owners of single drive systems
to use application software designed for dual drive systems.
Copying Your MS-DOS Diskettes
The first important task you must complete with your new
system is to make a “backup” copy of your MS-DOS diskettes.
To do this, you will need seven blank diskettes. If is a good
idea to prepare seven diskette labels at this time. Write the
following on those diskette labels, using a felt tipped pen:
Write down the MS-DOS version number on each diskette
label. This will avoid confusion later if you upgrade your
operating system to a new version. As you finish copying and
checking each MS-DOS master diskette, peel the correct label
off of the backing paper and place it on the upper left-hand
side of the front face of the new diskette.
The following procedures will show you how to make backup
copies of your MS-DOS master diskettes on both single and
dualdrive systems.
Copying on Single Drive Systems
MS-DOS uses the external command DISKCOPY to copy
entire diskettes. DISKCOMP is used to compare the original
and backup diskettes to ensure that the copy is accurate.
4-12
Using MS-DOS With Your Computer