Specifications

Close the latch and press R.
To remove the diskette, turn the drive latch up until it is
horizontal and the edge of the diskette pops out. Carefully pull
out the diskette, place it in its protective envelope, and store it
in a proper location, such as a diskette container.
If you have an optional 3 1/2-inch diskette drive, insert the
diskette with the label facing up and the metal shutter leading
into the drive, as shown below. Slide the diskette into the
drive until it clicks into place.
Figure 3-5. Inserting a diskette (3 1/2)
To remove a 3 1/2 inch diskette, press the release button to
release it. When the edge pops out of the drive, pull out the
diskette and store it properly.
3-12
Using Your Computer