Specifications

Emulation Speed
You can select the system speed, for example, according to an
application software you want to run with your system using
this parameter.
The options are: 8,
10,
12,
16,
24, 32,
40
Peripheral Setup
When you scroll down to this parameter, the following
message will be displayed on the right side of the Setup
message.
l Serial 1
If you’d like to use the on board serial port 1 for COM 1, set this
option “COMl”. But, when you install the external card to
use another serial port for COMl, you should select
“Disable” on this option to disable the on board serial port.
l Serial 2
Set this option “COM2” if you want to use the on board
serial port 2 for COM2. Like serial 1, you should also
disable this option when you install the external card to use
another serial port for COM2.
l Parallel
You can use the on board parallel port either for LPTl or
LPT2 by setting this option. However if you want to use
another parallel on an external I/O card, you should disable
this option.
The CMOS Setup Program 2-9