Specifications

Setting up the serial port for a printer
If you are using a serial printer but your software does not
support a serial printer, you must do two things before you can
print:
Set up the data transmission parameters for the serial port.
Tell the computer to redirect printer data from the parallel
port to the serial port.
See MODE command in MS-DOS manual.
5
Connecting the Power Cord
Follow these steps to connect the power cord:
1. Insert the power cord into the AC inlet on the computer’s
back panel, as shown below. To avoid an electric shock, be
sure to plug the cord into the computer before plugging it
into the wall socket.
Figure 1-6. AC Power Connections
Setting Up Your System
l-9