Specifications

The Enter New Track # and Head # box will appear with the

current track # (Cyl.) value entered in the field to the right of

“Enter New Track #.” Type in a new value (if desired) at the

blinking cursor, and press

< ENTER

>. Enter a new value at

“Enter New Head #.” The program will not accept dual

entries. All values must not exceed the corresponding cylinder

and head values for the disk drive type entered at that field.

Using the up and down arrow keys, move the cursor bar until

“Delete add entry” is highlighted. Press

< ENTER >. The

last entry in the Bad Track List box is highlighted. Use the up

and down arrow keys to highlight the entry you wish to delete.

After highlighting the desired entry you wish to delete, press

< ENTER

> to delete it. The entry box will disappear and the

block cursor will once again highlight “Add an entry” in the

Bad Track Edit Menu. To add more entries, press <ENTER>.

Clear the Bad Track List

Using the up and down arrow keys, move the cursor bar until

“Clear bad trk list” is highlighted. To clear the list in the Bad

Track List box, press

< ENTER >.

When you are ready to save the information in the Bad Tracks

List box, press

<ENTER>.

The edit menu will disappear and

the cursor returns to the “Start cylinder number” field in the

Hard Disk Format information box.

E-14

Advanced ROM Diagnostics