Specifications

These 47 different drive types are identified by the following
characteristics:
This is the number designation for a drive with
certain identification parameters.
This is the number of cylinders found in the
specified drive type.
This is the number of heads found in the
specified drive type.
W-pcomp is the read delay circuitry, which takes
into account the timing differences between the
inner and outer edges of the surface of the disk
platter. The number designates the starting
cylinder of the signal.
L-zone is the landing zone of the heads. This
number determines the cylinder location where
the heads will normally park when the unit is
shut down.
This is the formatted capacity of the drive based
on the following formula:
# of heads x # of cylinders x 17 secs/cyl. x 512 bytes/sec.
To choose a drive type, use the up and down arrow keys. The
bar cursor highlights each selection in sequence. The type
value (l-47) of your highlighted selection will automatically
appear in the Hard Disk Format information box. When you
are satisfied with your selection, press <ENTER>. This
moves the cursor to the next field.
E-10 Advanced ROM Diagnostics