Specifications

It is common to use FDISK to create an MS-DOS partition
that takes up the entire hard disk drive and then make that
partition bootable. Now that you have completed these tasks,
you can restart your system using your MS-DOS Install
diskette.
Make sure the MS-DOS install diskette is in the A drive, then
press the ENTER, key. -Your system will now reboot. It does this
to update the new partition information in its configuration
RAM. You may now format your hard disk, and load the MS-
DOS system files onto it.
Formatting Your Hard Disk
Now that your hard disk is partitioned, you need format it.
If your hard disk needs to be formatted, begin by selecting the
Command Prompt option from the DOS shell. Enter the
following command:
Using Your Hard Disk 6-9