Service manual

EPSON Color Copy Station 8200 Revision A
Disassembly and Assembly Disassembly and Assembly 46
4.2 Disassembly and Assembly
This section explains disassembling procedure.
4.2.1 Upper Case Removal
1. Remove 5 screws (SMH/W#6 X 6N) located back of CCS8200.
2. Remove the upper case.
Figure 4-1. Upper Case Removal
NOTE:
Screw tightening tongue: 11 ± 0.5kgf.cm
4.2.2 Optional Board Removal
4.2.2.1 ISA Board Removal
1. Remove the upper case. (“Upper Case Removal” on page 46)
2. Remove one screw (SMH/W6# X 6N) securing ISA board to the body case.
3. Remove ISA board from the slot (SLOT1) of the mother “Disassembly and
Assembly” board
Figure 4-2. Position for Installing the Optional Board
NOTE:
Screw tightening tongue: 11 ± 0.5kgf.cm
CAUTION
See “Precaution” on page -34 before starting disassembly
and assembly procedures.
Upper Case
3 Screws
CPU
PCI1:ECP Board
PCI2:SCSI Board
PCI3:Network Board
PCI4:Blank
SLOT1:ISA Board (for Target Board)
SLOT2:Blank (for Master Board)
Mother
Board
PCI 1: ECP Board
PCI 2: SCSI Board
PCI 3: Network Board
PCI 4: Blank
SLOT 1: ISA Board (Target Board)
SLOT2: Blank (Master Board)
Mother
Board
CPU
Connector for
Power Supply
Cable PS2
Connector for
Power Supply
Cable PS1
DIMM RAM Slot
Body Case
2 Screws
Connector for
Key Board