Specifications

S1C33 Family Tool Selection Guide

Note 1: The S5U1C3300xS modules may be borrowed from Seiko Epson for a period of six months.

Note 2: For further details on the S5U1C33xxxEx components, see "■COMPATIBILITY LISTS".

Note 3: Tool (C) is used in conjunction with (A) and (B).

C-3 Built-in ROM not present or not used

No additional items necessary

■ OPTIONAL TOOLS

The following tools are available to complement the basic tools.

(G) ASIC development emulation support

There is a board using a CPLD for ASIC emulation.

G-1 Using Altera Flex10K100A

This Altera CPLD contains the equivalent of 100,000 gates. It is mounted on an S5U1C33001Mx component and

connected to the target via an S5U1C33xxxEx component.

Note that the Altera PLD development tool MAX+PlusII and a download cable are also necessary.

S5U1C33xxxEx + S5U1C33001M1 + Altera MAX+PlusII

G-2 Using Altera APEX20K400E

This Altera CPLD contains the equivalent of 400,000 gates. It is mounted on an S5U1C330C2D1 component and

connected to the target via an S5U1C33xxxEx component.

Note that the Altera PLD development tool Quartus and a download cable are also necessary.

S5U1C33xxxEx + S5U1C330C2D1 + Altera Quartus

Note 1: S5U1C33001M1 supports 5V bus. S5U1C33001M2 and S5U1C330C2D1 support 3.3V bus.

Note 2: For further details on the S5U1C33xxxEx components, see "■COMPATIBILITY LISTS".

(H) Enhancing break functions

The following tool, connected to the S1C33 external bus, provides addition break functions.

H-1 S5U1C33001Mx break functions

Combining S5U1C33000C Version 3 with the break functions inside the S5U1C33001Mx CPLD enhances the map

break, bus break, and area break functions. The S5U1C33001Mx component is connected to the target via an

S5U1C33xxxEx component.

S5U1C33xxxEx + S5U1C33001M1

Note 1: The above is for models using a 5V bus. Substitute S5U1C33001M2 if the bus operates at 3.3V.

Note 2: For further details on the S5U1C33xxxEx components, see "■COMPATIBILITY LISTS".

(I) S5U1C33xxxEx extension cables

These extension cables are for use with an S5U1C33xxxEx component.

I-1 176-pin cable

S5U1C33xxxEx — S5U1C33T00E3 — S5U1C33T00T2 + Target board

I-2 100-pin cable

S5U1C33xxxEx — S5U1C33S00E3 — S5U1C33S00T2 + Target board

Note: These cables are compatible with both 5V and 3.3V operation.