Specifications

S1C33 Family Development Environment

■ S1C33 FAMILY DEVELOPMENT ENVIRONMENT LIST

● Software Tools

Tool Description

S5U1C33000H In-circuit debugger for the S1C33 chip with on-chip ICE

This is a reduced-pin connecting-type ICE requiring only 4 or 10 pins for connection.

S5U1C330M2S + Debug monitor

S5U1C330M1D1 (5V) Enables the creation of an inexpensive debug environment using user resources (ROM 10KB,

S5U1C330M2D1 (3.3V) RAM 2.5KB, SIO 1ch.) to connect to the debugger.

● Hardware Expansion Tools

Tool Description

S5U1C33209E1 (5V) Emulation pod for the S1C33209 (with emulation memory board I/F) Note)

S5U1C33209E2 (3.3V) With the capacity to emulate up to 256KB of internal ROM. (maximum 50MHz, 0 wait state)

S5U1C33L01E1 (3.3V) Emulation pod for the S1C33L01 (with emulation memory board I/F) Note)

Supports ROM development using the internal ROM emulation function. (maximum 50MHz, 0 wait state)

S5U1C33T01E1 (5V) Emulation pod for the S1C33T01 (with emulation memory board I/F) Note)

S5U1C33T01E2 (3.3V) With the capacity to emulate up to 256KB of internal ROM. (maximum 50MHz, 0 wait state)

S5U1C33221E1 (5V) Emulation pod for the S1C33221 (with emulation memory board I/F) Note)

S5U1C33221E2 (3.3V) With the capacity to emulate up to 256KB of internal ROM. (maximum 50MHz, 0 wait state)

S5U1C33240E1 (5V) Emulation pod for the S1C33240 (with emulation memory board I/F)

S5U1C33240E2 (3.3V)

S5U1C33S01E1 (3.3V) Emulation pod for the S1C33S01 (with emulation memory board I/F) Note)

With the capacity to emulate up to 256KB of internal ROM. (maximum 50MHz, 0 wait state)

S5U1C330D1M1 (5–3.3V) ROM emulation I/F board

The DIP socket for the target board ROM and the S5U1C33001Mx/S5U1C33002Mx are connected

to emulate ROM. It supports ×16 type of 1M, 2M, 4M, 8M, and 16M-bit ROMs in 40 to 42-pin DIPs.

S5U1C33T1M1 (5–3.3V) Flash emulation I/F board

The S5U1C33001Mx/S5U1C33002Mx is connected to the 48-pin TSOP flash memory board pat-

tern on the target board to emulate flash memory. It supports ×16 type of 4M, 8M, 16M, and 32M-

bit flash memory in 48-pin TSOPs.

S5U1C33001M1 (5V) 2MB × 2 block emulation memory board (accessible with 1 wait state up to 33MHz)

S5U1C33001M2 (3.3V) When two boards are cascaded, up to 2MB × 4 blocks can be emulated.

Powerful break functions for a map break, six bus breaks and two area breaks can also be added

to the S5U1C33000H (with S5U1C33xxxEx connected).

S5U1C33002M1 (5V) 1MB emulation memory board (accessible with 1 wait state, up to 33MHz)

S5U1C33002M2 (3.3V) When two boards are cascaded, up to 1MB × 2 blocks can be emulated.

S5U1C33003M1 (5V) 2MB × 2 block emulation memory board (accessible with 1 wait state up to 33MHz)

S5U1C33003M2 (3.3V) When two boards are cascaded, up to 2MB × 4 blocks can be emulated. This board has no flex10k

for expanding break functions but other functions are the same as S5U1C33001Mx.

Note: High-speed SRAM for ROM emulation is a rental option.

S5U1C33001S (for 3.3V), S5U1C33000S (for 5V)